Objections may possibly be urged against the hypothetical generation of intermediate ground by means of middle sections, and it is difficult to free this subject wholly from exception; but with a given number of transverse sections taken in the field, if close attention is paid to the inclination of the ground as developed by the end sections, and occasionally where it is very complex, if the figures are simplified by introducing additive or deductive solids, we have not yet met with any other practical method, giving results equally satisfactory. Various expedients are known to engineers for facilitating the computation of the areas of cross sections, to attempt an account of which, though it might be interesting to students, would prolong this paper to an inconvenient length. The above examples embrace, as we have stated, specimens of the principal varieties of excavation and embankment; and a little attention to the calculations and the modes of deducing the middle sections between those usually taken in the field, will enable any one to apply the "Prismoidal Process" to the mensuration of earth work upon canals, roads or railroads. When the mean areas are computed, it will be much more expeditious to get out the cubic yards from a table of cubic yards previously made out (supposing the stations regularly 100 feet,) for each foot and tenth of mean area, from 0.1 up to the largest which commonly occur: such or similar tables in manuscript are in the possession of many engineers, but those who have them not can in a few days construct a set by simple addition, and verify them by observing how the cubic yards for the preliminary areas of the first hundred, are subsequently repeated in the same decimal place. Indeed, Mr. Macneill's tables (if extended to tenths of feet) might be used; by constructing a supplemental set to show by inspection the height or centre cutting in level ground, of two sections with the given base and slopes, to be respectively equivalent in area, to the end sections of any given length of excavation or embankment; or these heights could be ascertained by the aid of an ingenious formula given by Mr. Macneill, and being found might then be wrought with in entering the tables according to the direc tions laid down: either of these proceedings, by determining a true mean cut VOL XXV Plate 1. 2.9 33.- dist out. 18. 47. dis out... 32. -16. Fig.6. 27. 27. 12. 15. 1: 27. 12. 34. 12. 27. 31. 15. 1:9 12. b 38. رح |