 | Frederick Augustus Griffiths - 1854 - 406 pages
...under tLe •kid, hauling it very tight, and making fast. A beam, fixed at one end, and loaded at tlve other, will bear half the weight of one of the same...the end of a beam, instead of being only supported, tie fixed, its strength will-be in the proportion of 3 to 2. From the foregoing results it will be... | |
 | Frederick Augustus Griffiths - 1868 - 540 pages
...the point where w is placed will be found by the following proportion : — AsSwXw s : S WxWs: :W:w. A beam, fixed at one end, and loaded at the other,...the strength of a rectangular beam varies, as the bieadth multiplied by the depth squared, divided by the length, — - — ; and if the breaking weight... | |
 | United States. War Department - 1897 - 1084 pages
...inches X 2J inches with the 4-J inches dimension in the plane of the wheel. Each arm, then, acting as a beam fixed at one end and loaded at the other, will carry Ppoimds; 9.5 P=Mo, which= -, where »=7,000 pounds, n = 2f inches andl = bH3+2Bfc' _.75 X 91.... | |
 | United States. Army. Corps of Engineers - 1897 - 1074 pages
...inches x 2J inches with the 4J inches dimension in the plane of the wheel. Each arm, then, acting as a beam fixed at one end and loaded at the other, will carry P pounds; 9.5 P=Mo, which=— , where e =7,000 pounds, я = 2J inches and I = ШЧ-2ВА' .75x91.125-l-2x.42... | |
 | 1902 - 304 pages
...load. The effect of the load on a beam will decrease in the ratio of its proximity to the support. A beam fixed at one end and loaded at the other will bear one-half the weight of the same when supported at each end. The strength of round timber is about one-half... | |
 | 1902 - 306 pages
...load. The effect of the load on a beam will decrease in the ratio of its proximity to the support. A beam fixed at one end and loaded at the other will bear one-half the weight of the same when supported at each end. The strength of round timber is about one-half... | |
 | American School of Correspondence - 1908 - 498 pages
...at one end and loaded at the other, to a beam uniformly loaded and supported at both ends,., Answer. A beam, fixed at one end and loaded at the other, will I,ear only one-eighth the load of a similar beam with a uniform load and supported at both ends. EXAMPLES... | |
 | 1909 - 546 pages
...at one end and loaded at the other, to a beam uniformly loaded and supported at both ends? Answer. A beam, fixed at one end and loaded at the other, will bear only one-eighth the load of a similar beam with a uniform load and supported at both ends. EXAMPLES... | |
| |
... ends. Problem 57. What is the relative strength of a beam fixed at one end and loaded at the other, to a beam uniformly loaded and supported at both ends? Answer. 