| 1895 - 1104 pages
...cool in a desiccator. When thoroughly cool it is to be weighed carefully. It is to be nearly filled with the solution and connected to the rest of the circuit by being placed on a clean insulated copper support to which a binding screw is attached. The anode is then to be immersed in... | |
| National Academy of Sciences (U.S.) - 1888 - 840 pages
...cool in a desiccator. When thoroughly cool it is to be weighed carefully. It is to be nearly filled with the solution and connected to the rest of the circuit by being placed on a clean insulated copper support to which a binding screw is attached. The anode is then to be immersed in... | |
| Great Britain - 1894 - 610 pages
...then left to cool in a desiccator. When thoroughly dry it is weighed carefully. It is nearly filled with the solution, and connected to the rest of the...covered by it and supported in that position ; the connexions to the rest of the circuit are made. Contact is made at the key, noting the time of contact.... | |
| British Association for the Advancement of Science - 1892 - 1146 pages
...then left to cool in a desiccator. When thoroughly dry it is weighed carefully. It is nearly filled with the solution, and connected to the rest of the...covered by it and supported in that position ; the connexions to the rest of the circuit are made. Contact is made at the key noting the time of. contact.... | |
| British Association for the Advancement of Science - 1892 - 1258 pages
...then left to cool in a desiccator. When thoroughly dry it is weighed carefully. It is nearly filled with the solution, and connected to the rest of the...covered by it and supported in that position ; the connexions to the rest of the circuit are made. Contact is made at the key noting the time of contact.... | |
| 1893
...circuit. The total metallic resistance of the circuit should not be less than 10 ohms. Method of Making Measurement. — The platinum bowl is washed with...being placed on a clean copper support, to which a binding-screw is attached. This copper support must be insulated. The anode is then immersed in the... | |
| American Institute of Electrical Engineers - 1893 - 780 pages
...then left to cool in a desiccator. When thoroughly dry, it is weighed carefully. It is nearly rilled with the solution, and connected to the rest of the...being placed on a clean copper support, to which a binding-screw is attached. This copper support must be insulated. The anode is then immersed in the... | |
| 1894 - 876 pages
...cool in a desiccator. When thoroughly cool it is to be weighed carefully. It is to be nearly filled with the solution and connected to the rest of the circuit by being placed on a clean insulated copper support to which a binding screw is attached. The anode is then to be immersed in... | |
| Henry Smith Carhart, George Washington Patterson - 1895 - 360 pages
...of the circuit by being placed on a clean copper support, to which a binding-screw is attached. The copper support must be insulated. The anode is then...position ; the connections to the rest of the circuit are then made. Contact is made at the key, noting the time of contact. The current is allowed to pass for... | |
| Henry Smith Carhart, George Washington Patterson - 1895 - 362 pages
...cool in a desiccator. When thoroughly cool it is to be weighed carefully. It is to be nearly filled with the solution and connected to the rest of the...copper support to which a binding screw is attached. The anode is then to be immersed in the solution so as to be well covered by it, and supported in that... | |
| |